A practical food-preparation surface for modular camping kitchens, overland equipment and outdoor cooking setups.
The INTECAMP Modular Camping Cutting Board can be fitted to a compatible INTECAMP multifunction camping kitchen box or used independently on a stable table, bench or vehicle tailgate.
Its food-contact-grade surface provides a dedicated area for chopping vegetables, preparing meat and arranging ingredients at the campsite. A reinforced molded underside helps the board retain its shape during normal use and transport, while the low-profile design makes storage straightforward.
Outdoor equipment brands, wholesalers and private-label buyers can order it as part of a complete camping kitchen system or as a separate accessory.
When fitted to a compatible INTECAMP multifunction camping kitchen box, the board creates a defined preparation area beside the cooking and washing zones. The metal connecting rail and molded mounting points work with the appropriate support hardware, adding useful worktop space without requiring another camp table.
This modular arrangement is well suited to:
All-in-one camping kitchen boxes
Overland and vehicle-based kitchen systems
RV and campervan cooking equipment
Portable outdoor cooking stations
Family camping kitchen sets
Compatibility note: The kitchen model, connector position and approved product drawing should be confirmed before ordering.
The board also works as an independent preparation surface when the complete kitchen box is not required. Place it on a clean, flat and stable picnic table, workbench or vehicle tailgate. Compatible support hardware may also be supplied, subject to the agreed configuration.
This gives retailers and distributors a versatile product that can be sold both to existing camping-kitchen owners and to customers looking for a practical standalone outdoor accessory.
The upper face has a fine textured finish for routine chopping and ingredient preparation. Rounded corners make the board easier to handle and reduce sharp contact points when packing.
Reinforcing ribs on the molded underside help distribute load and limit unnecessary flexing. Integrated mounting points and the metal connecting rail support installation within an approved modular kitchen configuration.
Food-contact-grade preparation surface
Integrated or standalone use
Reinforced molded underside
Good dimensional stability during normal use
Fine textured upper surface
Rounded corner design
Low-profile construction for easier storage
Metal connecting rail for modular installation
Molded mounting and support points
Reusable alternative to disposable preparation surfaces
Suitable for OEM, wholesale and private-label programs
The board is made from food-contact-grade molded material selected for routine food preparation. Its reusable construction reduces reliance on disposable cutting sheets and temporary prep surfaces.
The material is suited to the moisture exposure, repeated setup and vehicle transport typical of camping use. Its reinforced construction also helps the board resist unwanted flexing and deformation under normal conditions.
Use note: This product is not a heat pad. Keep it away from burners, open flames and hot cookware unless the selected material specification has been tested and approved for that use. Replace any board that develops deep cuts, cracks or other damage.
For B2B buyers, the value of this accessory lies in its simple function and flexible position within a product range. It can help you:
Add a dedicated preparation module to an existing camping kitchen range
Offer replacement or spare boards to current customers
Build a more complete portable kitchen package
Sell the board as an independent camping accessory
Create private-label accessory programs
Reduce the need for a separate preparation table
Use a consistent preparation surface across several kitchen configurations
Modular camping kitchen boxes
Portable outdoor kitchens
Overland kitchen systems
RV and campervan accessories
SUV and pickup camping equipment
Glamping and campsite rental equipment
Picnic and base-camp food preparation
Outdoor cooking accessory collections
Private-label camping product ranges
Replacement and after-sales accessory programs
Product Name | Food-Grade Modular Camping Cutting Board |
|---|---|
Product Category | Camping kitchen accessory and outdoor food-preparation board |
Main Material | Food-contact-grade molded material |
Standard Appearance | Black with a fine textured preparation surface |
Corner Design | Rounded corners |
Structural Design | Reinforced molded underside with mounting and support points |
Connecting Component | Metal rail for compatible modular installation |
Use Modes | Installed on a compatible camping kitchen or used independently |
Compatibility | Selected INTECAMP multifunction camping kitchen systems; third-party compatibility requires drawing or sample confirmation |
Cleaning | Routine hand washing with mild detergent is recommended |
Standard Supply | Cutting board only, or board with approved support and connecting hardware, depending on the quotation |
OEM Options | Color, branding, packaging, labels and accessory configuration can be evaluated |
Dimensions and Weight | To be confirmed according to the approved drawing or physical sample |
Final dimensions, mounting positions, material grade, packaging and supplied hardware must be confirmed before mass production.
INTECAMP works with importers, camping equipment brands, distributors and outdoor product developers. Depending on the approved specification and order quantity, customization can include:
Custom product colors
Printed or molded branding
Private-label packaging
Barcode and product labels
Instruction sheets
Retail, mail-order and master cartons
Accessory kits and replacement-part packaging
Connecting and support hardware
Bundling with compatible INTECAMP camping kitchen boxes
MOQ, lead time and customization feasibility depend on the material, color, logo method, packaging and order volume.
The standard board is designed for specified INTECAMP camping kitchen configurations and should not be described as universally compatible with every portable kitchen.
For a third-party installation, please provide:
Product drawings and required board dimensions
Connector spacing and support height
Expected working load
Photos of the intended installation
A physical sample, when available
Our team can then evaluate whether the standard board is suitable or whether the connecting structure needs to be adjusted.
Before mass production, specifications should be confirmed through an approved drawing or sample. Inspection points may include:
Surface appearance and board flatness
Dimensional consistency
Reinforcement condition
Connector alignment and support-hardware fit
Color consistency
Packaging protection and carton marking
Final accessory count
Food-contact documentation and testing requirements should be agreed according to the destination market and approved material specification.
Hand wash the board with mild detergent and clean water after use. Dry it thoroughly before storing it inside a camping kitchen box or vehicle.
Do not place it directly over a burner, flame or hot cookware. Avoid aggressive abrasive tools that could unnecessarily damage the preparation surface. Dishwasher suitability should only be stated after the selected material and product configuration have been tested at the required wash temperature.
Yes. It can be used as a conventional preparation board on a clean, flat and stable surface. If a freestanding support configuration is required, confirm the necessary hardware when requesting a quotation.
No. It is designed for compatible INTECAMP systems. Installation in a third-party kitchen should be checked against the product drawing, connector spacing and support structure.
It is made from food-contact-grade molded material. The exact material specification and required food-contact documentation should be confirmed for each project and destination market.
The reinforced molded construction is designed to improve dimensional stability and reduce unnecessary flexing during normal use. It should still be protected from excessive heat, open flames and unsuitable storage conditions.
Yes, subject to order quantity and production review. Custom colors, printed or molded branding, labels and private-label packaging can be evaluated for OEM projects.
Yes. The board can be supplied as a replacement component, an accessory for a compatible INTECAMP kitchen or part of a complete kitchen bundle.
Sample availability, cost and delivery time depend on the required configuration. Sample approval is recommended before mass production, particularly for third-party installations.
MOQ depends on whether you require the standard product or a customized color, logo, connector or packaging solution.
Please provide the target quantity, destination market, intended kitchen model, required dimensions, color, logo, packaging method and any food-contact testing requirements.
For an accurate quotation, please send us:
Estimated order quantity and destination country
Intended use and compatible INTECAMP kitchen model, if applicable
Required dimensions, color and logo
Packaging requirements
Food-contact testing or documentation requirements
Photos or drawings of any third-party kitchen system
INTECAMP can supply this cutting board as an independent outdoor accessory, a replacement component or part of a complete multifunction camping kitchen package.
Contact us to discuss samples, compatibility, OEM options and wholesale pricing.
