A practical 20,000 BTU propane stove for car camping, overlanding, RV travel, tailgating and family outdoor cooking.
This portable two-burner gas camping stove gives users enough space and heat control to prepare a complete meal rather than relying on a single pot. Its two burners operate independently, allowing water to boil on one side while food simmers or fries on the other.
The fold-out side panels and raised lid create a three-sided windscreen around the cooking area. When the meal is finished, the stove closes into a compact steel case with an integrated carry handle and securing latch.
Available from INTECAMP for wholesale, OEM and private-label outdoor cooking programs.
20,000 BTU/h total nominal heat input
Two independently controlled propane burners
Push-button piezo ignition
Three-sided wind protection
Room for one 12-inch pan and one 10-inch pan at the same time
Individual flame adjustment from simmering to high heat
Integrated handle for vehicle-supported travel
Steel case with closing latch
North American 16 oz propane-cylinder configuration available
Custom colors, branding, packaging and gas connections available by project
Many compact camping stoves provide enough heat for coffee or a single saucepan but become restrictive when users need to prepare breakfast, pasta, soup or a family meal.
This model has a wider cooking deck that can hold a 12-inch pan and a 10-inch pan simultaneously. The user can boil water on one burner while cooking eggs, vegetables, meat or sauce on the second.
Each burner has its own control knob. This matters in normal use: high output is useful for boiling, but sauces, rice and reheating require a steadier low flame. Independent controls allow the two cooking zones to be managed separately.
The reference configuration delivers a combined nominal output of 20,000 BTU/h, equivalent to approximately 5.86 kW. When divided evenly, each burner provides approximately 10,000 BTU/h or 2.93 kW.
Actual cooking performance and fuel consumption will vary with ambient temperature, wind, cookware, regulator pressure and flame setting.
The raised lid forms the rear wind barrier, while two folding side panels shield the burners from crosswinds. Together they create a three-sided cooking enclosure without closing off the front control area.
The windscreen helps reduce flame disturbance and unnecessary heat loss in exposed campsites, coastal locations and open tailgate areas. It also makes cooking performance more consistent when both burners are in use.
The panels fold inward when the stove is closed, so no separate windscreen needs to be packed or stored.
Each burner uses a push-button piezo ignition system. After opening the appropriate gas control, the user can ignite the burner without reaching across the cooking surface with a match or handheld lighter.
The mechanical piezo system does not depend on batteries. For safe operation, users should always follow the ignition sequence printed in the approved instruction manual and keep a suitable manual lighting method available as a backup.
Once closed, the stove forms a suitcase-style unit with an integrated handle and securing latch. The steel case protects the burners, pot supports, ignition components and control area during normal transport.
This is best positioned as a vehicle-supported cooking product. It suits car campers, families, overlanders, RV owners and tailgating customers. It is not intended to compete with ultralight backpacking burners carried over long distances.
Its relatively flat packed shape also works well in:
SUV cargo areas
Overland kitchen boxes
Campervan storage compartments
RV exterior lockers
Camping kitchen cabinets
Retail camping bundles
Specification | Reference Configuration |
|---|---|
Product type | Portable tabletop gas camping stove |
Number of burners | 2 |
Burner control | Independent control knob for each burner |
Total nominal heat input | 20,000 BTU/h |
Approximate metric output | 5.86 kW total |
Approximate output per burner | 10,000 BTU/h / 2.93 kW |
Ignition | Push-button piezo ignition |
Fuel type | Propane |
Wind protection | Raised rear lid plus two folding side panels |
Cookware capacity | One 12-inch pan and one 10-inch pan simultaneously |
Reference closed dimensions | Approx. 23 × 15 × 5.5 in / 58.4 × 38.1 × 14 cm |
Reference fuel supply | 16 oz / 1 lb propane cylinder |
Reference maximum runtime | Up to approximately 1 hour on high using one 16 oz cylinder |
Main body material | Coated steel |
Reference color | Light green |
Transport features | Integrated handle and securing latch |
Gas cylinder included | No |
Recommended use | Outdoor use only |
OEM/ODM availability | Yes |
Final weight and carton data | Confirmed after sample approval |
All dimensions, output figures, gas components and packaging data must be confirmed in the signed specification sheet and approved production sample.
Gas fittings are not universal.
The standard North American configuration can be supplied with a regulator connection for a 16 oz disposable propane cylinder. Other markets may use different cylinder valves, LPG mixtures, operating pressures, hoses, regulators, injectors and warning labels.
Before quotation, buyers should specify:
Destination country
Propane, butane or LPG supply
Required operating pressure
Cylinder or valve type
Disposable cylinder or refillable tank
Required hose length
Regulator connection
Applicable certification or testing requirement
A stove should never be connected to a refillable cylinder, bulk tank or alternative fuel source using an unapproved adapter. The regulator, hose, injector and valve must be matched as one tested gas system.
A familiar two-burner format that can be sold as an upgrade from single-burner tabletop stoves. The visible windscreen, separate controls and suitcase-style body are easy to explain both online and in-store.
The product can be configured for local gas connections, packaging languages and retail positioning. Destination-market requirements should be settled before samples are produced.
The closed shape fits well inside modular camping kitchens, storage boxes and exterior vehicle compartments. Buyers integrating the stove into another product must confirm ventilation, heat clearances and safe placement.
The steel housing offers several branding positions, including the lid, front control panel and outer case. Color, graphics and packaging can be developed around an established outdoor product range.
Available customization may include:
Custom stove body color
Pantone or buyer-approved finish
Printed, laser-marked or metal badge logo
Custom control-panel graphics
Branded control knobs
Market-specific regulator and connector
Custom hose length
Multilingual operating manual
Safety and compliance labels
Retail color box or mail-order carton
Barcode, SKU and carton markings
Carry bag as an optional accessory
Cookware or camp-kitchen bundle packaging
Spare regulator, ignition or knob kits
Customization scope, MOQ and development cost depend on the gas system, certification requirements, finish, packaging and order quantity.
For an OEM project, the inspection plan can be agreed before mass production. Typical checks include:
Gas-path leak testing
Valve shut-off inspection
Regulator and hose verification
Burner ignition cycling
Minimum- and maximum-flame stability
Independent burner-control testing
Flame distribution and combustion inspection
Pot-support alignment and stability
Windscreen hinge and retention testing
Handle and latch operation
Coating adhesion and surface inspection
Warning-label and instruction-manual verification
Retail-carton and master-carton checks
Testing requirements should follow the approved specification and the regulations of the destination market. Certification from one market should not be presented as approval for another market.
This stove is suitable for retail ranges built around:
Family camping
Car camping
Overlanding
RV and campervan travel
Tailgating
Fishing trips
Outdoor event cooking
Backyard use
Outdoor emergency meal preparation
It should be marketed as an outdoor tabletop stove rather than an indoor appliance or permanently installed RV cooker.
The stove closes into its own steel case, helping protect the working components and keeping the packed shape compact.
For wholesale orders, packaging can be developed around the intended sales channel:
Retail color box for physical stores
Reinforced mail-order carton for e-commerce
Multilingual label set
Buyer-specific SKU and barcode
Printed or plain master carton
Spare-parts allocation by shipment
Pallet-loading plan for regional distribution
Final net weight, gross weight, carton dimensions and container-loading quantity are issued after the product configuration and packaging sample have been approved.
The standard reference set includes:
One two-burner camping stove
Integrated lid and folding windscreen panels
Propane regulator connection
Operating and safety instructions
The propane cylinder is not included. Exact accessories and gas components are confirmed in the quotation.
This product is intended for outdoor use only.
Do not operate it inside a tent, vehicle, camper, caravan, garage or other enclosed space. Burning LPG produces carbon monoxide, an odorless gas that can cause serious injury or death.
Always:
Place the stove on a stable, level and heat-resistant surface
Keep it away from tents, fabrics and combustible materials
Check the gas connection for leaks before ignition
Keep the cylinder upright and away from direct heat
Keep the cooking area ventilated
Never leave a lit stove unattended
Keep children and pets away from hot surfaces
Turn off the gas supply after use
Allow the stove to cool before closing or transporting it
Follow the approved operating manual supplied with the product
The reference configuration provides 20,000 BTU/h of total nominal heat input, equal to approximately 5.86 kW.
Yes. The cooking area can accommodate one 12-inch pan and one 10-inch pan simultaneously. Each burner has an independent control knob.
The reference configuration can run for up to approximately one hour at high output on a 16 oz propane cylinder. Runtime changes with flame setting, temperature, wind and cylinder condition.
It uses push-button piezo ignition. No batteries are required. The control knob must be opened in the correct sequence before the ignition button is pressed.
No. Gas cylinders are normally purchased locally because cylinder types and transport rules vary between markets.
A refillable tank may only be used with a regulator, hose and connector approved for that cylinder and destination market. Buyers should state the intended cylinder system before ordering.
No. This reference product is an outdoor tabletop stove. It must not be operated inside a tent, vehicle, campervan or other enclosed space.
No. It is better suited to car camping, overlanding, RV travel and other vehicle-supported trips where cooking capacity is more important than minimum carried weight.
Yes. Body color, branding position, control-panel graphics, packaging and manuals can be customized, subject to order quantity and technical review.
Market-specific configurations can be evaluated. Operating pressure, injector, hose, regulator, cylinder connection, labels and certification requirements must be confirmed before sample production.
Please provide the destination country, estimated quantity, required gas connection, operating pressure, certification needs, preferred color, logo file, packaging language and target delivery date.
